Abstract
In plant research, radioisotope imaging provides useful information about physiological activities in various tissues and elemental transport between plant organs. To expand the usage of imaging techniques, a new system was developed to visualize beta particles, x-rays and gamma-rays emitted from plant bodies. This real-time radioisotope imaging system (RRIS) visualizes radioactivity after conversion into light with a CsI(Tl) scintillator plate. Herein, the RRIS detection properties of the gamma-ray emitters 22Na, 65Zn, 86Rb, 109Cd and 137Cs were evaluated in comparison with those of radioluminography (RLG) using an imaging plate. The lower quantitative detection limit (Bq mm−2) during a 15 min period ranged from 0.1 to 4, depending on the nuclide, similar to that of RLG. When the quantitative ability to detect radiation from various Arabidopsis tissues was analyzed, the quantitative capability in silique and the thick internode tended to be low. In an EGS5 simulation, beta particles were the greatest contributors to RRIS imaging of 22Na, 86Rb and 137Cs, and low-energy x-rays contributed significantly to 65Zn and 109Cd detection. Thus, both self-absorption and air space between the sample and scintillator surface could impair quantitative RRIS imaging. Despite these issues, RRIS is suggested for quantitative time-course measurements of radionuclide motion within plants.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.