Abstract
Dry matter is a routine test for all animal feeds, facilitating feed comparisons and diet formulation. It is the most frequent test, yet the most challenging with respect to precision and accuracy. Our objective was to evaluate the accuracy, repeatability, and physicochemical impacts of oven-drying times on laboratory dry matter test results in animal feeds obtained by loss on drying at 105 °C. Eighteen primary samples collected from different feed sources were grouped into high- and low-moisture content materials. The tested methods were based on loss on drying: at 105 °C and Karl Fischer titration was adopted as the reference method. Test portions were oven dried at 105 °C for 3, 6, 12, 16, and 24 h, and test results were compared to the reference method. Test portions were also subjected to a color evaluation using a colorimetric technique. The method based on 3 h of drying provided the closest estimates to those obtained by Karl Fischer titration. Extending heating time (i.e., above 3 h) increases the bias, especially for high moisture feeds, which was attributed to a higher occurrence of non-enzymatic reactions. This was corroborated by the color of the residues, which became darker with increased heating time. The repeatability of loss on drying methods was considered adequate, ranging from 0.32 to 0.73%. The loss-on-drying method based on the binomial 105 °C × 3 h minimizes the bias in the water recovery and causes less non-enzymatic browning in the test portions. The loss-on-drying method recommended for laboratory dry matter in animal feeds is drying the test portions at 105 °C for 3 h.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.