Abstract
A primary consideration in the welding of structures for service in Canadian offshore and arctic regions is the toughness of weld metals required at very low ambient temperatures (−30°C to −60°C). To assess the suitability of cored wires for applications in these environments, some currently available commercial consumables for the flux-cored arc welding (FCAW) process were evaluated. Cored wires belonging to four different categories: basic, rutile, metal-cored and innershield, were used to prepare welds with similar welding procedures. Weld metal Charpy V-notch (CVN) and crack tip opening displacement (CTOD) tests were carried out and the effect of weld metal composition, microstructure and inclusion content in the weld metal toughness was examined. The Charpy transition temperatures and the CTOD toughness results indicated that, of the 16 wires tested, there were only seven that would be suitable for critical applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Offshore Mechanics and Arctic Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.