Evaluation of exergy and energy efficiencies of photothermal solar radiation conversion

Abstract

In this paper, a new thermodynamic model for photothermal solar radiation conversion into mechanical through a heat engines is proposed. The developed equations allow for the energy and exergy contents of solar radiation to be found, as well as the energy and exergy efficiencies corresponding to concentration type solar-thermal heat engines operating under a range of conditions. The calculation method remains accurate to other published models when their assumed conditions are imposed to the newly developed model. The heat flux absorbed by the receiver (which is assumed to be a grey body and is placed in the focal point of the solar concentrator) depends on the hemispherical absorptivity and emissivity, concentration ratio and receiver temperature. The model is used to conduct a parametric study regarding the energy and exergy efficiencies of the system for assessing its performance. The use of a selective grey body receiver (having a reduced emissivity and a high absorptivity) for enhancing the conversion efficiency is also studied. If the absorptivity approaches one and the emissivity is low enough the photothermal conversion efficiency becomes superior to the known black body receiver limit of 0.853. It is found that in the limit of receiver emissivity tending to zero and absorptivity lending to one, the present model gives the exergy content of solar radiation because the work generated reaches its maximum. In this situation the energy efficiency approaches the exergy efficiency at 1-ITTIN0/TINS where TS and T0 are the sun and ambient temperatures, respectively. The influence of the ambient temperature on the exergy and energy efficiencies becomes apparent, with effects of up to 15%, particularly for high absorptivity and low emissivity. The heat transfer conductances at sink and source of the heat engine have a considerable impact on the efficiency of solar energy conversion. The present model is developed in line with actual power system operations for better practical acceptance. In addition, some irreversibility parameters (absorptivity, emissivity, heat transfer conductivity, etc.) are studied and discussed to evaluate the possible photothermal solar radiation conversion systems and assess their energy and exergy efficiencies.