Evaluation of Eu:LiCAF for neutron detection utilizing SiPMs and portable electronics

Abstract

With the increasing cost and decreasing availability of 3He, there have been many efforts to find alternative neutron detection materials. Lithium calcium aluminum fluoride (LiCAF) enriched to 95% 6Li doped with europium was evaluated here as a replacement material for 3He. Wafers 0.5 cm thick, consisting of LiCAF crystals in a rubberized matrix, were embedded with wavelength shifting fibers (WSF) and mated to silicon photo-multipliers (SiPMs) to measure the photon response in a flux of neutrons from a DD neutron generator. Excellent discrimination was realized between neutrons and gammas, and both pulse-height discrimination and pulse-shape analysis were explored. A Figure of Merit (FoM) of 1.03 was achieved. By applying pulse-shape analysis, a simple neutron count output was generated by utilizing a low-pass filter to suppress fast pulses from the SiPM output and subsequently applying a threshold to the remaining signal. Custom electronics were built to bias the SiPMs, then amplify, filter, discriminate, and digitize the LiCAF/WSF scintillation photons, resulting in a digital pulse that can easily be counted with any microcontroller or field programmable gate array. A significant advantage of LiCAF is that it can be fabricated into any shape/size (when embedded in a rubberized matrix), and the light output and transparency is sufficient to allow for thicker scintillators which enable detection of both thermal and epithermal neutrons. This work demonstrated that Eu:LiCAF is capable of discriminating gammas from neutrons and is a potential replacement material for 3He, especially for nuclear security applications and neutron spectroscopy.