Evaluation of Electrode Setups by MRI Based Human Phantom with FEM Based Quasi-Static Solver for Bioimpedance Measurement.

Abstract

Transthoracic electrical bioimpedance (TEB) measurement for acquiring of hemodynamic parameters e.g. stroke volume (SV) and cardiac output (CO) becomes commonly used. For precise and reliable measurement, a good understanding of the measurement system is needed to provide robust electrode placement, reproducible results, and large signal amplitudes. We propose an evaluation by MRI based human phantom with FEM based quasi-static solver for electrode placement in bioimpedance measurement. Placements according to Osypka, Cheetah and Bernstein et al. were simulated and compared with measurements taken from a (real) human subject. As a parameter for evaluation of signal quality, the percentage of current passing through the descending aorta from the overall injected current is measured. The placement according to Osypka results in 1.46 % of current flow through the descending aorta (Cheetah placement 1.12 %, Bernstein et al. placement 0.877 %) for the male human phantom DUKE. The simulation was compared with a real human subject (with comparable age, height, weight) by calculating the baseline impedance (Z0). The simulation seems to fit at best with Osypka placement, where the deviation between simulated baseline impedance and real human subject is 19.9 % (deviation for Cheetah 34.1 %, deviation for Bernstein 62.5 %). The simulation with MRI based human phantoms seems to be a very good basis for further investigations of current injection and bioimpedance measurement comprehension.