Evaluation of Efficacy of Selected Conventional and Experimental Insecticides and Bt Hybrids for Control of Corn Earworm and European Corn Borer on Sweet Corn, 1997

Abstract

Abstract The tests were arranged in a RCB design with four replications. Each plot consisted of four rows, each being 30 inches wide and 50 ft long. Thirty-foot-wide alleys were established between the four replications. Insecticides were applied to the middle two rows of each plot, leaving two untreated rows between adjoining plots. Twelve insecticide treatments were compared with two Br-sweet corn hybrids (Heritage Bt and Bonus Bt) and their non-Bt isolines to two untreated controls. The 12 chemical treatments and the two untreated checks were planted with the Silver King variety sweet corn. Two untreated check plots were included in each replication and were averaged for the ANOVA. Treatments were applied very four to five days beginning on 8 Aug at 8% silk. All insecticide treatments were applied with a modified John Deere 6000 high-clearance vehicle (HCV) with a rear-mounted boom. Six Conejet (TX VS-8) hollow-cone nozzles (three per row) were calibrated to deliver 30.1 gpa at 40 psi and a speed of 2.5 mph, utilizing a compressed air system. Four nozzles (two per row) were attached to drops and directed the spray towards the ear zone area, a third nozzle (one per row) was mounted directly over the row with the spray being directed into the whorl (tassel) area.