Abstract

In this work, a method for total sulphur determination in automotive gasoline using dried matrix spot sampling is proposed. The method is based on the deposition of the sample on a cellulose-based filter paper and subsequent sulphur quantification via CS diatomic molecule using high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS GF MAS). The sample deposition was carried out, along with the chemical modifier, on a 20-mm filter paper disc previously adapted into a polytetrafluoroethylene (PTFE) mould. The liquid phase was removed by heating the PTFE mould, and then the gasoline sample-embedded filter paper was punched in smaller discs (procedure A) or pulverised (procedure B) before the analyses. The mixture of Pd and Mg was used as chemical modifier to stabilise the sulphur compounds on the filter paper and on the graphite furnace. All the calibration curves constructed using seven different sulphur-containing compounds had a coefficient of determination higher than 0.995 and a linear range from 2 to 150 mg kg−1 S. By using the optimised conditions, the best characteristic mass, limits of detection and quantitation were 6 ng, 0.6 and 1.8 mg kg−1, respectively. The two sampling procedures (A and B) were evaluated for real samples, and procedure B was chosen since it markedly improved the precision. Using this procedure, satisfactory recovery values from 95 to 106% were obtained in the spike-recovery tests. In addition, the S concentrations for the certified reference materials were not statistically different from the certified values at 95% confidence level. Sulphur concentrations from 20 to 46 mg kg−1 were found in the six analysed gasoline samples, and these values were statistically assessed using a reference method (ASTM 5453). Spectral interference caused by MgF and MgCl diatomic molecules was observed and investigated.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call