Evaluation of dilute hydrochloric acid and acid ammonium oxalate as extractants for some heavy metals from Nile River sediments

Abstract

The suitability of a 0.5 M HCl solution for extraction of Fe, Mn, Cd, Co, Cu, Pb, and Zn from Nile River sediments was evaluated by comparing its effectiveness with that of conventional acid ammonium oxalate (Tamm's solution) and aqua regia extraction solutions. The present study has shown that although the extraction data indicate that both 0.5 M HCl and acid ammonium oxalate solutions are able to extract heavy metals simultaneously from the adsorbed, organic, and precipitated phases of Nile sediments, the 0.5 M HCl solution is preferred. It provides a rapid, reliable, and inexpensive method of measuring environmentally mobile metal concentrations in the aquatic sediments. From an analytical chemistry point of view, the 0.5 M HCl extracts do not clog the atomizer of the spectrophotometer. Extraction with dilute HCl solution obviates the need to use chemicals, some of which are toxic or not available readily as a high-purity grade. A standard extraction method should be relatively simple, to conduct a routine analysis of large numbers of sediment samples, yet at the same time it should provide sufficient information for assessment of the environmental impact of particulate metals. Therefore, extraction with 0.5 M HCl solution is very suitable for heavy-metal pollution monitoring in the Nile River