Evaluation of Concrete Performances Based Recycled Aggregates of Road and Build Demolition for a Formal Using in the Republic of Congo

Abstract

The reuse of recycled aggregates in the composition of concrete is a major challenge today in response to the high cost of construction and the environmental impact of waste This work evaluates the the physic-mechanical properties of concrete using recycled building demolition aggregates and bituminous concrete of pavements in the Republic of Congo. The idea was to check whether these recycled aggregates can have the same performance as when they were first used in concrete. From the results obtained, the recycled building aggregates have good mechanical strength according to the Los Angeles (32.5%) and Micro-Deval (29.3%) tests. Concrete made from building demolition aggregates (CRA1#) has a 28-day compressive strength of (28.8MPa), which is very close to that of the CNA# control concrete (31.11MPa). Concrete incorporating a mixture of asphalt concrete and building demolition aggregates (CRA3#) has a compressive strength of 20.32MPa. In terms of compressive strength, only CRA1# and CRA3# can be used as class C25 concrete for CRA1# and C20 for CRA3#.