Abstract
원형강관구조 접합부는 재료의 발전과 접합부의 복잡한 국부 거동 때문에 지속적인 연구되고 있다. 이 연구는 지강관에 압축력이 작용하는 원형강관 X-이음 트러스접합부의 주강관 소성화변형과 접합부 강도에 재료강도와 주강관벽세장비가 미치는 영향을 파악하는 것을 목적으로 한다. 이를 위하여 재료강도와 주강관벽세장비를 변수로 하여 다양한 원형강관 X-이음 트러스접합부에 대하여 범용 유한요소해석 프로그램인 ANSYS Mechanical APDL을 사용하여 정밀유한요소해석을 수행하였다. 해석결과를 토대로 현행 건축구조기준에서 제시하는 주강관소성화 한계상태의 접합부 설계강도를 검토하였다. 결론적으로 원형강관 X-이음 트러스접합부 설계에서 고려해야 할 사항을 제시하였다. The researches on circular hollow section(CHS) connections have been conducted continuously because of development of material properties and complex local behavior of the connections. The purpose of this study is that the effects of material strength and chord wall slenderness on chord plastification and strength of CHS X-joint truss connection under compression on branch member were evaluated. To this end, finite element analyses were performed for various connections, using ANSYS Mechanical APDL program. Based on the analysis results, the design strength of the connections according to chord plastification limit state in KBC were examined. Finally, special considerations for CHS X-joint connection design were suggested.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
