Evaluation of characteristics of fast-response pressure-sensitive paint under low-pressure conditions

Abstract

In this study, fast-response polymer-ceramic pressure-sensitive paints (PC-PSP) were developed and evaluated for pressure measurement under low-pressure conditions. The PC-PSP using poly[1-trimethylsilyl)-1-propyne] (poly(TMSP)), which has high oxygen permeability under low-pressure conditions, was developed in this study. The static and dynamic characteristics of the developed poly(TMSP)-based PC-PSP were evaluated in comparison with those of conventional poly(isobutyl methacrylate) (poly(IBM)) binder and ruthenium-complex-based PC-PSPs, which have been used for pressure measurements under atmospheric pressure conditions. The particle mass content of titanium dioxide of PC-PSPs with poly(TMSP) was changed from 90 wt% to 98 wt% to increase the frequency response. The critical pigment volume concentration, so called CPVC, of the PC-PSP with poly(TMSP) and hydrophobic particles and hydrophilic particles were 95–98 wt% and 90–95 wt%, respectively. The PC-PSP using hydrophilic particles with poly(TMSP) and a particle mass content of 98 wt% could provide a cut-off frequency of approximately 4.5 kHz and a high local Stern–Volmer coefficient of 0.5 at low pressure of 2 kPa.