Evaluation of Changes in Hydrogeological Properties of Porous Media Induced by air Sparging in Sand Matrix

Abstract

Air sparging (AS) is one of the most efficient techniques for remediating saturated soils and groundwater contaminated with volatile organic compounds. Most studies have focused on how the subsurface conditions control the AS process; however, the “side-effects” of AS that feed back to subsurface environment have not been well addressed. This paper studied the perturbation of porous media induced by AS and the consequent multi-parameter changes with the support of Miller soil box and resistivity test, and Darcy experiment and tracer breakthrough test. The Miller soil box test shows that the resistivity response can be credibly used as a non-intrusive method to indicate the porosity change, and that the porosity-resistivity data can be well fitted using Archie equation (R2 > 0.98). Based upon the electricity measurement and above quantitive relationship, it was found that the porosity increased near the air injection point and decreased near the upper boundary of the column due to the upward-transport of particles during air sparging. The changes in porosity were found to be directly proportional to the air injection rate, and the maximum absolute variation of porosity was up to 0.104 at the air flow rate of 20 ml/min, while it did not change in the absence of AS. Both the hydraulic conductivity and dispersion coefficient increased after AS perturbation as the preferential flow pathway formed. The two parameters changed from 3.40 m/d and 0.110 to 6.13 m/d and 0.288, respectively, at 20 ml/min. This work provides useful insight into the changes in flow and transport properties of porous media induced by AS, which then help to understand the instability of air flow and the parameter-uncertainty analysis in related AS model.