EVALUATION OF CBR USING GEOSYNTHETICS IN SOIL LAYERS

Abstract

In urban areas, the service life of pavement on weaker soil subgrade affected severely due to their high compressibility and plasticity behaviour. These soils possess less strength, CBR value and have high affinity to moisture content. Also the seasonal changes affects the soil properties adversely. Stabilization techniques using geo-synthetic materials for improving properties of these types of soft subgrades. To increase the sub grade soil strength and to reduce the thickness of flexible pavement, Geosynthetics are increasingly used in wide variety of civil engineering applications. Geo- synthetics are the cost-effective ground modification materials which acts as a reinforcement and also increases the stability and bearing capacity of soil. Many researchers recommends the use of geo-synthetic material performs good results in soil stabilization. From this view, Evaluation has been made on poorly graded sand with the inclusion of go-grid, geo-textile and geo-composite materials between soil layers in different proportions. The CBR and shear parameters are determined for different combinations of subgrade thickness. The geo-engineering properties such as Atterberg limits, grain size distribution, compaction characteristics, and CBR value of poorly graded sand were evaluated and reported. To get the maximum California bearing ratio (CBR), the present study is put forward to understand the strength change in the soil with the addition of geo-synthetic materials. Such a study would be helpful in material selection based on site condition and strength gain along with economy.