Abstract
Risk analysis/assessment is one of the challenges encountered during operations of offshore units on the Norwegian Continental Shelf (NCS). In recent years, the Petroleum Safety Authority (PSA) has focused on hazards relating to floating installations and thus requested that more attention should be made by the industry on hazards relating to buoyancy loss and stability. Ballast systems play a very vital role to ensure vessel stability. Various failure modes of semi-submersible ballast systems are identified and possible barriers and consequences due to the ballast system failure during drilling operation are considered. The failure mode effect and criticality analysis (FMECA) of the main components of the semi-submersible’s ballast system is adopted to determine the failure causes and failure modes that could influence each components performance, and thus identifying the most critical component(s). The Structured What-If Technique (SWIFT) is used to compensate for hazard identification for the unidentified hazards (i.e., human errors), in the FMECA. By studying the most critical system components, a qualitative risk analysis is conducted to model accidental sequences by using the fault tree method to establish the chain of failure events. The result of the Structured What If Analysis (SWIFT) shows that maloperation of the ballast system is the main contributing failure cause. This involves, failure to properly describe ballast procedure, failure to follow ballast plan, wrong sequence of closing/opening valve, maloperation of valve, time pressure complacency, communication gap or general lack of knowledge of the system. The FMECA findings indicate that failure of valves to “close on demand” with a Risk Priority Number (RPN) of 60, is the most critical.
Highlights
This chapter is aimed to introduce the background and objective of this thesis
Due to the high risk involved in drilling operations, the structural integrity and stability of the platform on which the drilling operation is performed are of uttermost importance to the success of the operation
In order to be able to evaluate risk that involves ballast failure of a semi-submersible during operations, it is important to understand to an extent the components and subsystem that make up the ballast system
Summary
This chapter is aimed to introduce the background and objective of this thesis. This will include information on types of ballast failures, scope of work and a description of the organization of the report. In recent times, drilling operations are performed on mobile platforms, most especially on semi-submersibles. Semi-submersible rigs are regarded as the most versatile drilling platforms in the marine industry (HSE, 2006). This is because they can be used for both deep (i.e., water too deep for fixed platforms) and shallow water. The first semi-submersible rig was developed in 1961 by the Blue Water Drilling Company. In 1971, it became rapidly accepted by the oil and gas industry after the construction of the first self-propelled semi-submersible by ODECO (Ismail et al, 2014)
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
