Abstract
The aim of this study was to evaluate fracture toughness, hardness, ceramic/metal bond strength and microstructure of experimental dental porcelain and compare it with commercial type. Specimens of specific dimensions were prepared. Fracture toughness was assessed by a three-point bending test. The Vickers hardness was measured using a microhardness tester. The ceramometal bond strength was measured using a universal testing machine. The load was applied at the porcelain/metal interface via a chisel edged blade with a crosshead speed of 2.0 mm/min until fracture. The polished specimens of dental porcelain were chemically etched and the microstructure was analyzed with a scanning electron microscope. The results showed comparable fracture toughness and bond strength for both materials, while the experimental porcelain exhibited higher hardness. The experimental porcelain showed uniform cohesive failure while the commercial type showed mixed mode of failure. The microstructure of the experimental porcelain was tetragonal leucite crystals dispersed randomly in a glass matrix. The leucite crystals exist in two forms, acicular and rod like structures. It was concluded that the experimental porcelain has adequate fracture toughness and ceramic/metal bond strength that can resist the rapid crack propagation and its consequent catastrophic failure, which indicates a material serviceability in the oral cavity.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Mechanical Behavior of Biomedical Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
