Abstract
The adsorption capacity of three eggshell bioadsorbents was evaluated to remove contaminants from raw leachate. Optimal conditions for the removal of suspended solids, color, and organic compounds, as COD, were achieved by batch experiments with three levels of pH and absorbent concentrations. Kinetic studies and isotherms were developed to understand the behavior of COD removal by the bioadsorbents. The chemical and physical characterizations indicate the leachate used in the present study had characteristics between mature and intermediate leachates. The optimal adsorption conditions were pH 2.0 and 1.0 gram (0.5 g/L) of adsorbent. Adsorbent M showed the best adsorption capacities, removing 99.06% (1446 NTU) of turbidity, 86.25% (4140 UPt-Co) of color and 54.56% of COD (1530mg/L). The data obtained through the kinetic and isothermal tests were better fitted to the pseudo first order and Langmuir models, with an equilibrium adsorption capacity (Qe) of 139 mg of COD/g of adsorbent and a specific speed of 1.51 min-1.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
