Evaluation of a Revised AERMOD Treatment of Plume Dispersion in the Daytime Elevated Stable Layer

Abstract

Advanced dispersion models such as AERMOD specifically address the portion of a plume emitted in convective conditions that is sufficiently buoyant to rise into the stable layer above the elevated inversion. This portion of the plume mass is often referred to as the “penetrated plume” because that plume component breaks through the elevated inversion and penetrates into the stable layer aloft. A pre-mature mixing of the penetrated plume to the ground has been identified in the current formulation of AERMOD, which is the USEPA-preferred short-range dispersion model and used in several other countries. This behavior has been observed based on data from field studies where the model is found to overpredict ground-level concentration events due to the penetrated plume component, with the timing of these peak predictions too early in the day. A proposed update to AERMOD to address the penetrated plume issue (referred to as “HBP” for modifications particularly important for “highly buoyant plume”) is documented and evaluated in this manuscript. The revised approach involves a check on the convective mixing height for the current hour as well as the next hour to determine how much of the penetrated plume has been captured by the convective boundary layer by the end of the current hour. The amount of the penetrated plume mass that is allowed to mix to the ground in the HBP modifications depends upon the result of this calculation. The HBP modification has been evaluated as an update to AERMOD for 3 databases along with a sensitivity analysis of the effects of the HBP changes on a variety of stack heights and buoyancy fluxes. The findings of the evaluation indicate that the HBP changes to AERMOD result in reduced overprediction tendencies. “Implications Statement” for the HBP paper being submitted to JAWMA A proposed enhancement to AERMOD to address a pre-mature mixing of penetrated plume material to the ground has been performed by implemented and evaluated by the authors. The enhancement, referred to as the highly buoyant plume (HBP) is based on work developed by Dr. Jeffrey Weil. HBP is designed to better characterize the penetrated plume behavior in the model such that it aligns more closely with observations based on data from field studies.