Abstract

Single-element low-intensity focused ultrasound (LIFU) is an emerging form of human neuromodulation. Current coupling methods are impractical for clinical bedside use. Here, we evaluate commercially available high-viscosity gel polymer matrices as couplants for human LIFU neuromodulation applications. We first empirically tested the acoustic transmission of three densities at 500 kHz and then subjected the gel with the least acoustic attenuation to further tests of the effect of thickness, frequency, de-gassing and production variability. The highest-density gel had the lowest acoustic attenuation (3.3%) with low lateral (<0.5 mm) and axial (<2 mm) beam distortion. Different thicknesses of the gel up to 10 mm did not appreciably affect results. The gel polymers exhibited frequency-dependent attenuation at 1 and 3 MHz up to 86.6%, as well as significant beam distortion >4 mm. Poor de-gassing methods also increased pressure attenuation at 500 kHz up to 59.6%. Standardized methods of making these gels should be established to reduce variability. Commercially available de-gassed, high-density gel matrices are a low-cost, easily malleable, low-attenuation and distortion medium for the coupling of single-element LIFU transducers for human neuromodulation applications at 500 kHz.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.