Abstract
Valid routine testing of pulse oximeters and their sensors is problematic. A suitable testing device must not only generate the pulsatile signal the pulse oximeter requires for its operation, but must possess light absorption characteristics similar to those of living tissue. A new device called Pulse Oximeter Tester (POT) has recently become available which, it is claimed, addresses these problems. To evaluate the POT as a suitable stimulus for pulse oximeters. We tested all the pulse oximeters and their sensors with a set of POTs simulating blood oxygen saturation of 80%, 90% and 100%. The tests were performed at simulated heart rates of 30, 75 and 110 bpm. The SpO2 readings (mean +/- SD) obtained with the 80%, 90% and 100% POTs were 80.7 +/- 1.3%, 90.3 +/- 0.9% and 100 +/- 0.0% respectively. There were no significant differences in readings obtained at the different simulated heart rates. Two pulse oximeters gave readings that deviated more than 2 SD from the mean. Their sensors were subsequently found to be defective. POTs provide suitable stimuli for testing pulse oximeters. In our study sample they were found to be highly specific, but of unknown sensitivity.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Canadian journal of anaesthesia = Journal canadien d'anesthesie
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
