Abstract
A recently introduced porcelain repair system utilizing 4-META (Etch-Free Primer with C & B-Metabond) was evaluated for bond strength to porcelain. This system purportedly eliminates hydrofluoric acid-etching and silane pretreatment. Forty porcelain specimens were prepared and treated with the 4-META repair system. A resin cylinder was bonded to the treated porcelain surface. Twenty of the specimens were tested after 24 hours while the other 20 were tested after thermocycling (800 cycles at 6 degrees C to 60 degrees C). The mean bond strengths were: 24 hours 17.4 MPa (+/- 4.8), thermocycled 19.1 MPa (+/- 7). Cohesive failure of the porcelain occurred in all of the specimens, both the 24 hour and the thermocycled. These bond strengths compare favorably with or exceed those of other porcelain repair systems tested in other studies.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
