Evaluation and Optimisation of Processes Time for the Hot Air Oven Containing Sleeves

Abstract

Abstract: The Hot air producing Oven is used to heat the sleeves which are used as raiser in casting purpose. The sleeves that are being manufactured are made of epoxy resin which consists of approximately 75% water and 25% mineral mix before heating and once the processes are complete i.e. the sleeves getting heated in the oven the product would turn into 35% water + 65% mix. The whole process would estimate the time around 4.5 hours. The first 2.5 hours the water is being removed from the sleeves in form of latent heat vaporization. The next 2 hours is use as the time for curing the them because of the flow of hot air through the sleeves. The processes time is evaluated keeping in mind that the heat transfer is happening in mixed convection. As they are placed vertically to the direction of air flow. The amount of heat transfer in terms of energy is evaluated for 4.5 hours in actual practise. The energy which is utilised in 4.5 hours is found and the same amount is consumed in 2.5 hours which is a solution solved theoretically by considering datum values. Keywords: epoxy resin, sleeves, latent heat, heat transfer, mixed convection.