Abstract
Engineering wake models enable fast calculation of wind-farm power generation including wake-turbine interactions, which is critical for annual energy yield calculations and for farm optimisation either at the design phase or during operation. The operating point of a turbine is determined based on its rotor-averaged wind speed, which is impacted by upstream wakes. The rotor-averaged deficit is typically calculated numerically by using a set of averaging points across the rotor disk, for which a Gaussian shape function is commonly evaluated. This numerical approach can have uncertainty based on the distribution of the averaging points. Also, a large number of averaging points can increase computational cost, which is detrimental for studies that rely on many individual calculations of farm power generation, e.g. layout optimisation. To avoid these drawbacks, we present a novel analytical solution to the circular-disk integration of a two-dimensional axisymmetric Gaussian function depicting upstream wakes for an arbitrary lateral offset between the rotor and the wake source. The analytical expression is compared against numerical averaging of an upstream wake, and is applied to the Horns Rev 1 wind farm showing excellent accuracy. Wind-farm layout optimisation models, especially methods based on gradient-descent optimisation, can benefit from the presented expression significantly, as this provides an analytically differentiable formulation for the rotor-averaged wind speed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have