Abstract
Abstract This study was initiated with the aim of replacing the nuclear density gauge (NDG) with nonnuclear alternative methods that can be used as acceptance tools during the compaction of soils and dense graded aggregates (i.e., unbound pavement layers). To fulfill this objective, a laboratory procedure for compacting large samples was developed. This procedure facilitated testing using three nonnuclear devices: Briaud compaction device (BCD), light weight falling deflectometer (LWD), and dynamic cone penetrometer (DCP). Four types of aggregates, two subgrade soils, one dense graded aggregate, and one recycled concrete aggregates, were selected to comprehensively cover a wide range of subgrade and base/subbase materials typically used in the State of New Jersey (NJ). Each device was evaluated for accuracy and repeatability. The sensitivity of the results measured from each device to moisture content, compaction effort applied, and testing time was also evaluated. Based on testing results, it was found that the DCP was most sensitive to detecting changes in the measured parameters. The results also indicated that the DCP was the most suitable device for replacing the NDG.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.