Evaluating the Effect of Deposition Strategy on Mechanical Characteristics of 316L Parts Produced by Laser Powder Directed Energy Deposition Process

Abstract

AbstractThe production of large components, the possibility to repair damaged parts and the ability to produce components of multi-graded or functional-graded materials are the main drivers of the research and the application of the Laser Powder Directed Energy Deposition (LP-DED) process. However, the knowledge of the process and of the relationships among the process parameters and the characteristics of the produced part is currently not completely understood. The aim of this paper is to fill the current gap in the scientific literature related to the effect of the deposition strategy on the part quality. Therefore, the influence of two of the most important parameters, namely the deposition path and the idle time, on the residual stresses and porosity is evaluated on 316L samples produced by the LP-DED process. The obtained results show that both parameters have a high influence on the porosity level and the residual stresses. In particular, it can be seen that a high value of idle time worsens both porosity and residual stresses. Then, it is also observed that the raster deposition path leads to a lower value of stresses.