Abstract
This article explores the effectiveness of the Pull-off Tensile Strength (POTS) test as a tool for evaluating the moisture damage resistance of asphalt mixtures. Currently, indirect tensile strength (ITS) and the Hamburg Wheel Tracking (HWT) test are used, but they have limitations such as expensive equipment and being heavy. The POTS test is a low-cost and portable alternative. This study investigated the effect of curing time and resting time on the POTS of asphalt-aggregate systems by subjecting samples to different curing times and resting times before testing their tensile strength under dry and wet conditions. The results show that the tensile strength decreases with increasing curing time or exposure to water, indicating that the debonding process between asphalt and aggregates occurs more rapidly with aging. The tensile strength ratio (TSR) of the POTS test for all three asphalt binder types increases with resting time and curing time, with the highest values observed at a curing time of 2 h and a resting time of 5–15 min. Additionally, this study found a strong linear relationship between the tensile strength ratios of ITS and POTS tests, regardless of curing time and resting time. Overall, the POTS test is a promising alternative for evaluating moisture damage resistance in asphalt mixtures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.