Abstract
An attenuation layer composed of ground mixed with stabilising agents can prevent the contamination of the surrounding area when using soils and rocks with geogenic contaminants in embankments. The optimum particle size of the stabilising agent must be selected based on the requirements of the construction site because the mechanical and chemical properties of the attenuation layer are site-specific. However, the relationship between the particle size of the stabilising agent and the attenuation performance of soil–agent mixtures has yet to be fully clarified. This study employs batch sorption tests to evaluate the attenuation of arsenic by a soil mixed with a calcium–magnesium composite with different particle sizes, ranging from powder particles (<0.075 mm in size) to granular particles with diameters between 2.0 and 9.5 mm. Amended soil more effectively attenuates the contaminant than the original soil. In one experiment, a stabilising agent of granular particles (between 2.0 and 9.5 mm) for the amendment increased the soil’s partition coefficient Kd from 14.5 to 22.2 cm3/g, which is more than a 50% improvement in the attenuation. Using a stabilising agent with a smaller particle size for the amendment has a greater impact. Kd increases linearly as the particle size of the stabilising agent decreases down to 0.075 mm. Using the Kd from laboratory tests, simulations with a one-dimensional advection–dispersion equation demonstrate the durability of the attenuation layer. Both the powder and the granular particles show promise as attenuation layer materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have