Evaluating priority strategies for decarbonising offshore wind turbine blades through lifecycle assessment

Abstract

Abstract While offshore wind is at the early stage of expansion, global capacity is expected to increase rapidly, reaching 330 GW by 2031. This work uses lifecycle assessment (LCA) to evaluate the opportunity for offshore wind energy decarbonisation through wind blade sustainable developments. The findings from the LCA are used to give informed recommendations towards priority areas of development across the blade lifecycle, that are critical to accelerate the sector’s transition towards net-zero targets. The production of raw materials was found to be the largest contributor to cradle-to-gave global warming potential (GWP). The sector should prioritise the utilisation of more sustainable materials, with an emphasis on the decarbonisation of carbon fibre production. Waste produced during blade manufacturing alone accounts for 10% of the blade’s GWP; therefore, increasing the material efficiency in this phase of the lifecycle is a significant opportunity for blade decarbonisation and should be a focus for the sector going forward. O&M was found to be the second largest contributor to GWP, with full decarbonisation of O&M practices potentially realising an 8% reduction in GWP. A range of alterative blade material scenarios were analysed, finding that recyclable resin systems have the greatest potential to decarbonise offshore blades. There are currently no commercial recycling operations for these resins therefore scale up of the recycling technologies is needed before they can be recycled in practice. Additionally, the development of low impact, economically viable circular solutions for legacy blade waste must be an immediate priority for the wind energy sector, given the anticipated exponential growth in global wind turbine blade waste generation. Graphical abstract