Evaluating Foamed Asphalt Stability Using Acoustic Emission Techniques

Abstract

AbstractThis paper focuses on the feasibility of using acoustic emission (AE) techniques to evaluate stability of foams produced from paving-grade asphalt binders. The study compared asphalt foamability index [expansion ratio (ER) and half-life (H-L)] measurements with AE measurements for the same foamed asphalt produced using a Wirtgen Model WLB 10 S Laboratory Asphalt Foaming Device. Both ER and H-L are used to characterize the suitability of asphalt binders to produce good-quality foamed asphalt binders for pavement construction. However, current methods for determining foamability are considered as empirical, operator-dependent, and cannot be used for continuous monitoring of the foaming process. Two performance-graded asphalt binders, four foaming water contents, and two foaming temperatures were used. Spectral analyses using a test for white noise suggest AE signals resulting from asphalt foaming are not white noise (p-value<0.0001) and therefore could be useful for evaluating foamed asphalt stabili...