Abstract
As Extreme UltraViolet (EUV) lithography nears high volume manufacturing (HVM) adoption to enable the sub-7nm scaling roadmap, characterizing and monitoring defects that print at wafer level are of critical importance to yield. This is especially true for defects coming from the EUV mask, such as multi-layer defects, added particles or growth on mask, and for defects coming from the pattern formation process itself, also referred to as stochastic printing defects. A “Print Check” solution has been previously described.1 This technique uses full-wafer patterned optical inspection to monitor mask defects that print on the wafer. In this paper we focus on developing metrology solutions for stochastic printing defects, which are random local variations that occur between structures that should, in principle, print identically, but actually occur at significant frequencies with current state-of-the-art processes. Specifically, we discuss the importance of monitoring these defects using broadband plasma optical inspection and e-beam defect review systems. We show extensive characterizations of defects on line space patterns down to a pitch of 36nm, on contact holes at a pitch of 48nm and on logic blocks in a foundry equivalent N5 test vehicle. Analysis methods based on CD SEM and review SEM images have been described.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.