Abstract
Abstract The integrity and residual life assessment of high temperature components require information obtained from the material's mechanical, uniaxial creep, creep crack initiation (CCI), and growth (CCG) properties. The information derived from these material tests needs to be validated and harmonized following a Code of Practice (CoP) so that variability in data as well as in the analysis can be optimized between different institutions. The paper describes a CoP for creep crack growth testing of industrially relevant specimens, which was developed within the framework of the partially European Commission (EC) funded project called “CRETE.” Novel aspects of the CoP include advice for testing different specimen geometries, which differ from the standard Compact Tension (C(T)) specimen proposed in the only available CCG testing standard ASTM E 1457. Recommendations for required number of tests, techniques for testing, treatment of test records, reduction of test data, and data analysis are presented. Associated specimen selection guidelines for industrial creep crack initiation and growth testing are also described. Validation tests carried out within the project on Type 316H steel at 550°C and a C-Mn steel at 400°C using relevant specimen geometries are also briefly described. The CoP contains recommended K and C* solutions, Y functions, and η factors, which are used to determine values of the fracture parameters K and C* for the specimen geometries considered, and these are summarized in this paper. Information from these new tests, together with a review of previous creep crack growth tests on nonstandard geometries, have been used in recommending the best method of analysis for the creep crack initiation (CCI) and creep crack growth (CCG) data for a range of creep brittle to creep ductile materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.