Abstract
The use of natural admixtures as a sustainable alternative to cement and chemical admixtures in concrete has gained significant attention. Eupatorium adenophorum Spreng (EAS), commonly known as the ‘forest killer’ in Nepal, is a perennial and herbaceous invasive plant. This prompted an experimental investigation aimed at assessing the potential utilization of its liquid and burnt ashes as additives in cement mortar. EAS leaves were dried, burnt at wooden coal fire, and sieved through a 90 μm sieve to obtain EAS powder. EAS liquid was produced by hammering the fragmented leaves, followed by squeezing and filtering. The control mortar had a water-cement ratio of 0.35 and a cement-sand ratio of 1.0. EAS powder content ranged from 0 % to 15 % and EAS liquid from 0 % to 0.4 %, by weight of cement. The optimal content (10 %) of EAS powder resulted in decreases in flow table value, density, and elastic modulus of mortar by 2.3 %, 4.2 %, and 10.6 %, respectively, while increasing compressive strength and water absorption by 2.3 % and 14.6 %, respectively. As for EAS liquid, its optimal content (0.3 %) led to increases in flow table value, density, compressive strength, elastic modulus, flexural strength, and splitting tensile strength by 11.0 %, 1.4 %, 13.0 %, 25.4 %, 28.4 %, and 33.0 %, respectively, while decreasing water absorption by 2.7 %. The observed increase in the compressive strength of mortar with the incorporation of EAS powder suggests its potential to substitute mineral admixtures. This can be achieved through improvements in the burning process, grinding to finer particles, and thorough micro-characterization, followed by detailed investigations into mortar properties. Additionally, the effectiveness of EAS liquid in replacing chemical admixtures to enhance various mortar properties has been confirmed. The collaborative use of EAS powder and liquid holds promise for supporting future sustainable infrastructure development, facilitating the production of eco-friendly green concrete.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.