Abstract
The bacterium Zymomonas mobilis is investigated as a model organism for the cultivation and separation of ethanol as a product by in situ extraction in continuous flow microreactors. The considered microreactor is the Coiled Flow Inverter (CFI), which consists of a capillary coiled onto a support structure. Like other microreactors, the CFI benefits from a high surface-to-volume ratio, which enhances mass and heat transfer. Compared to many other microreactors, the CFI offers the advantage of operating without internal structures, which are often used to ensure good mixing. The simplicity of the design makes the CFI particularly suitable for biochemical applications as cells do not get stuck or damaged by internal structures. Despite this simplicity, good mixing is achieved through flow vortices caused by Taylor and Dean vortices. The reaction system consists of two phases, in which the aqueous phase carries the bacterium and an oleyl alcohol phase is used to extract the ethanol produced. Key parameters for evaluation are bacteria growth and the amount of ethanol produced by the microorganism. The results show the suitability of the CFI for microbial production of valuable compounds. A maximum ethanol concentration of 1.26 g L−1 was achieved for the experiment in the CFI. Overall, the cultivation in the CFI led to faster growth of Z. mobilis, resulting in 25% higher ethanol production than in conducted batch experiments.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
