Ethanol dual-fuel combustion concept on heavy duty engine

Abstract

Limited crude oil resources and growing environmental awareness have raised a huge led to a huge motivation to seek new fuel alternatives for combustion engines. In this study the goal was to research the potential of ethanol as a compression ignition engine fuel utilizing dual-fuel combustion technology.In the studied DF (dual-fuel) concept, the primary fuel is injected into the intake manifold and it is ignited by injecting diesel fuel into the cylinder near the TDC (top-dead centre). A similar concept has been widely used in natural gas dual-fuel engines. By using ethanol as a primary fuel instead of gaseous fuel, the dual-fuel concept could be a true alternative for on-road and off-road heavy-duty vehicles without the obstacles of energy density and fuel distribution challenges of the gaseous fuels.The research engine in this study was a high speed heavy duty diesel engine modified for dual fuel combustion. The engine was equipped with a common-rail diesel injection system, which gave flexibility to modify the diesel injection to control the combustion. Especially the relationship between pilot and main diesel injection was investigated. The gathered results were promising. A maximum ethanol/diesel mass ratio of around 90% was achieved at high load conditions.