Abstract
The manganese-doped zinc sulfide (ZnS:Mn) films were investigated in terms of etch rates and selectivity with inductively coupled plasma (ICP). The changes of volume density of etching species in Cl 2/CF 4/Ar plasma were investigated with optical emission spectroscopy (OES). OES analysis indicated that the maximum Cl emission intensity was obtained with the gas mixture of 10% addition to CF 4(20%)/Ar(80%) plasma. The changes of chemical states on the surface were analyzed with X-ray photoelectron spectroscopy (XPS). XPS study indicated that Zn was formed non-volatile etch by products and remained on the surface after etching of ZnS:Mn (0.39 wt.%) in Cl 2/CF 4/Ar plasma. The etch rate of ZnS was gradually increased up to 10% addition of Cl 2 then decreased furthermore with increasing Cl 2 contents from 20 to 30%. The increase of etch rate can be explained by the effect of chemical and physical etching process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
