Abstract
Mesa structures were etched in HgCdTe using different Br2/HBr/Ethylene glycol (EG) formulations. Etch rate and degree of anisotropy (A) were studied in detail for all of the combinations. Addition of EG to the conventional etchant gave A>0.5, with controllable etch rates. Optimum etchant composition was determined to be 2% Br2 in a 3:1 mixture of EG:HBr. This composition resulted in a good anisotropy factor of ∼0.6 and a reasonably optimum etch rate of ∼2.5 µm/min, with rms surface roughness of ∼2 nm. Kinetics of the etching reaction have also been studied for the optimum etchant concentration and an etching mechanism has been proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have