Abstract

The etching characteristics and mechanisms of ZnO and Ga-doped ZnO (Ga-ZnO) thin films in a HBr/Ar/CHF3 inductively coupled plasma were investigated. The etching rate of ZnO was measured as a function of the CHF3 mixing ratio in the range of 0–15% in a HBr:Ar = 5:2 plasma at a fixed gas pressure (6 mTorr), input power (700 W), bias power (200 W), and total gas flow rate (50 sccm). The plasma chemistry was analyzed by a combination of the global (zero-dimensional) plasma model, Langmuir probe diagnostics (LP) and quadrupole mass spectrometer (QMS) analysis. It was found that the densities of both HBr and Br are significantly affected by the reactions with the CHF3 dissociation products, while both the ZnO and Ga-ZnO etching rates follow the behavior of the Br atom density and flux. This suggests that the ZnO and Ga-ZnO etching processes are not limited by the ion-surface interaction kinetics and appear in the reaction-rate-limited etching regime.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.