Etch characteristics of magnetic tunnel junction materials using H2/NH3 reactive ion beam

Abstract

Magnetic tunneling junction (MTJ) materials such as CoFeB, Co, Pt, MgO, and the hard mask material such as W and TiN were etched with a reactive ion beam etching (RIBE) system using H2/NH3. By using gas mixtures of H2 and NH3, especially with the H2/NH3( 2:1) ratio, higher etch rates of MTJ related materials and higher etch selectivities over mask materials (>30) could be observed compared to those etching using pure H2( no etching) and NH3. In addition, no significant chemical and physical damages were observed on etched magnetic materials surfaces and, for CoPt and MTJ nanoscale patterns etched by the H2/NH3( 2:1) ion beam, highly anisotropic etch profiles >83° with no sidewall redeposition could be observed. The higher etch rates of magnetic materials such as CoFeB by the H2/NH3( 2:1) ion beam compared to those by H2 ion beam or NH3 ion beam are believed to be related to the formation of volatile metal hydrides (MH, M = Co, Fe, etc) through the reduction of M-NHx( x = 1 ∼ 3) formed in the CoFeB surface by the exposure to NH3 ion beam. It is believed that the H2/NH3 RIBE is a suitable technique in the etching of MTJ materials for the next generation nanoscale spin transfer torque magnetic random access memory (STT-MRAM) devices.