Abstract
Rotational FRFs have not been measured in experimental modal analysis even though the importance of rotational FRFs have been recognized recently. Consequently it is difficult to utilize the FRFs on the basis of vibration testing for the structure modification analysis. The authors have proposed an estimation of the auto FRFs in rotation of structures. In the method a T-shaped rigid block whose inertia properties were known was attached to the measurement point on the structure. The estimation of three-degree-of-freedom (3-DOF) FRFs (one DOF in rotation and two DOFs in translation) of the beam structure using the T-shaped rigid block was demonstrated. The effect of estimated rotational FRFs against the random noise of measured FRFs were evaluated as a Reliability Factor. In this paper the estimation method of the cross FRFs in rotation and the reliability of the estimated FRFs are presented. A new rigid block whose overview is the cross-shape is designed for measuring 6-DOF FRFs. The 6-DOF FRFs of the beam structure is estimated. The structure modification analysis of 3D-rahmen structure based on experimental data is carried out.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
