Abstract
This study evaluates two expedient electronic sensors, a rising plate meter (RPM) and a “Grassmaster II” capacitance probe (GMII), to estimate pasture dry matter (DM, in kg ha−1). The sampling process consisted of sensor measurements, followed by pasture collection and a laboratory reference analysis. In this comparative study, carried out throughout the 2023/2024 pasture growing season, a total of 288 pasture samples were collected in two phases (calibration and validation). The calibration phase (n = 144) consisted of measurements on three dates (6 December 2023, 29 February and 10 May 2024) in 48 georeferenced sampling areas of the experimental field “Eco-SPAA” (“MG” field), located at Mitra farm (Évora, Portugal). This pasture is a permanent mixture of various botanical species (grasses, legumes, and others) grazed by sheep, and is representative of biodiverse dryland pastures. The validation phase (n = 144) was carried out between December 2023 and April 2024 in 18 field tests (each with eight pasture samples), in three types of representative pastures: the same mixture for grazing (“MG” field), a commercial and annual mixture for cutting (mowing) and conservation (“MM” field), and legumes for grazing (“LG” field). The best estimation model for DM was obtained based on measurements carried out in February in the case of the GMII probe (R2 = 0.61) and December 2023 and February 2024 in the case of RPM (R2 = 0.76). The estimation decreased very significantly for both sensors based on measurements carried out in May (spring). The validation phase showed greater accuracy (less RMSE) in “MG” field tests (RMSE of 735.4 kg ha−1 with GMII and 512.3 kg ha−1 with the RPM). The results open perspectives for other works that would allow the testing, calibration, and validation of these electronic sensors in a wider range of pasture production conditions, in order to improve their accuracy as decision-making support tools in pasture management.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.