Estimation of Actual Evapotranspiration in Panam Canal Command Using Remote Sensing and Geographical Information System (GIS)

Abstract

Estimation of reference evapotranspiration (ET0) and actual evapotranspiration (ETc) is a key factor for estimation of crop water requirement, water balance and irrigation scheduling. The FAO-56 Penman–Monteith equation has been accepted universally for estimating of reference evapotranspiration (ET0). Considering the high spatial variation of meteorological phenomenon and limited availability of such dense network for data collection, application of remote sensing and GIS has gained momentum for estimation of ET0 and ETc over the larger area with accurately and efficiently. For estimation of ET0 and ETc, the most widely applied MOD16 remote sensing images as well as Landsat 8 remote sensing images are applied in this study of Panam canal command area which is located in the semi-arid middle Gujarat region. Initially, FAO-56 PM method is used to estimate ET0 and MOD16 data is used to estimate ET0, whereas Landsat 8 is used to estimate land surface temperature and then by using the regression equation to estimate maximum and minimum temperature to find out ET0 for the study area. Based on result obtained, it was found that Landsat 8 remote sensing-based data have better capacity to estimate actual evapotranspiration compared to the MOD16 remote sensing data. The better performance of Landsat 8 data compared to MOD16 data is due to the reason that it has better spatial resolution(30m) compared to MOD16 (1 km) remote sensing image and can represent the actual field conditions of farm fields which are generally smaller.