Estimating Tree Diameter at Breast Height (DBH) Using iPad Pro LiDAR Sensor in Boreal Forests

Abstract

Traditional Diameter at Breast Height (DBH) mensuration is labor-intensive and costly. This scoping study explored the possibility of using the Apple iPad Pro Light Detection And Ranging (LiDAR) sensor to estimate DBH. Three plots were scanned in a research plantation near Thunder Bay, Canada. Sites consisted of either Black Spruce (Picea mariana) or Red Pine (Pinus resinosa) planted with different initial densities. DBH was manually measured for validation. Point clouds were acquired for each plot using three scanning patterns; circular, figure-8, and transect. Single and five cross sections of 4 or 10 cm in thickness were extracted from each point cloud, centered at 1.3 m above the ground. Two circle fitting algorithms (Pratt, Taubin) and two ellipse fitting algorithms (Taubin, Szpak) were applied to the extracted cross-sections to estimate DBH. Scanning pattern and curve-fitting formula significantly impacted DBH estimate accuracy (p-value ≤ 0.001), while cross-section count and thickness did not. The circular scanning pattern with a single 4 cm cross-section and a combination of circle- and ellipse-fitting formulas was the most accurate DBH estimation method (RMSE = 1.1 cm; 6.17%).