Abstract
Obtaining complete rock cores is exceptionally challenging in certain extreme environments, such as deep earth and deep space; consequently, it is difficult to obtain the macro strengths of rock, which are the key indexes for engineering design, via standard rock mechanical tests. This research indicates that by determining and leveraging the mechanical properties of grains and grain-to-grain interfaces, the rock macro strength can be effectively estimated. Nanoindentation tests were first conducted to determine the elastic modulus of the mineral grains and their interfaces. Subsequently, symmetrical and anti-symmetrical four-point bending tests were executed to establish the statistical law governing interfacial tensile and shear fracture toughnesses. Furthermore, by employing the Dugdale–Barenblatt model and considering the oblique angular distribution of interfacial cracks, the corresponding tensile strength, shear strength, and friction parameter were derived. These meso‑mechanical parameters were then inputted into the 3D Finite-Discrete Element Method to estimate rock macro strength. And the numerical results were then compared with the results of standard uniaxial compression, direct tension, Brazilian splitting, and direct shear tests. The consistency observed between the predictions and experimental results attests to the validity of the proposed method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.