Abstract
Lobster farming produces higher organic carbon footprints; thus, a carrying capacity model must be developed specifically to address the issue. This study aimed to develop a carrying capacity for lobster farming based on a carbon deposition model. Bay and open waters (worst and best scenarios) carbon deposition models were developed using DEPOMOD. Two net cage configurations were used in each model. Current velocity, farming practices, and coastal geodatabases of seven provinces were analysed. The maximum carbon deposition in the bay was higher (1.67 kgC/m2/day) than in the coastal area (0.55 kgC/m2/day) for the single net cage configuration. Similarly, the bay’s four net cages produced a higher carbon deposition (4.11 C kg/m2/day) than the coastal net cages (0.88 kgC/m2/day). The bay has a smaller carbon footprint for both net cage configurations (68.98-140.12 m) compared to the coastal waters’ net cages (100.76-198.19 m). Based on the carbon deposition models, it is estimated that the assessed 598 Indonesia’s mariculture zones (total area of 1.47 million ha) could support 92,904 net cages (200 frames/net cage) capable of producing lobster of 557,429 tonnes/year. The proposed models could be used to replace the generic carrying capacity for lobster farming in Indonesia’s mariculture zones
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.