Abstract
In this study, a finite-element (FE) stress analysis of aircraft structural double-lap bolted joints was performed using the commercially available computational package ANSYS in order to obtain the clamping pressure distribution and to estimate the stiffness of the joined plates (members) within the clamped region. The joint consists of three aluminium alloy 7075-T6 plates clamped by a single bolt, washer, and nut. A three-dimensional (3D) FE model of the joint was generated, and then subjected to three different simulated clamping forces. 3D surface-to-surface contact elements were employed to model the contact between the various components of the bolted joint. The model included friction between all contacting surfaces, and also a clearance between the bolt shank and the joint hole. FE results revealed an overall crock-shaped pressure distribution at the joined plates. Moreover, some beneficial longitudinal compressive stresses were observed around the fastener hole as a result of the clamping compressive effect.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
