Abstract
The esterification of used cooking oil (UCO) with methanol was studied using different types of ion-exchange resins, that is, Purolite D5081, Purolite D5082, and Amberlyst 36. Several catalyst characterization analyses (elemental analysis, surface area measurement, particle size distribution analysis, scanning electron microscopy analysis, true density measurement, and acid capacity analysis) have been conducted in the screening stage. Of all of the catalysts investigated, Purolite D5081 resin showed the best catalytic performance and was selected for further experimental studies. The esterification process was carried out in a jacketed stirred batch reactor for 8 h. Elimination of mass transfer resistances and the effect of catalyst loading (0.5–1.5% w/w), reaction temperature (50–65 °C), and methanol to UCO feed mole ratio (4:1–12:1) on the conversion of FFAs were investigated. The highest FFAs conversion was found to be 92%, at a catalyst loading of 1.25% w/w, 60 °C reaction temperature, 6:1 methanol t...
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
