Establishing a Screening System of Indoor Air Pollutants Using MEMS Sensor to Create Internet of Things Sensing Platform

Rina Yadav,Cheng-Chen Chen,Chia-Yen Lee,Nien-Tsu Chen

doi:10.18494/sam.2021.3273

Abstract

Establishing a Screening System of Indoor Air Pollutants Using MEMS Sensor to Create Internet of Things Sensing Platform

Highlights

In recent years, European Union (EU) countries have suffered grave health and monetary problems triggered by indoor air pollution
Ethylene flooring containing 17% (w/w) DEHP was placed in six test field and laboratory emission cell (FLEC) at 22 °C, and it was observed that the specific emission rate (SER) of DEHP from vinyl flooring (VF) over one year was independent of RH.[7]
The small environmental control box test method was compared with another reported method and its validity was verified; the results showed that the coefficient of variation (C.V.) between the two methods was 18.78%, which was within a reasonable range.[22]

Summary

Introduction

European Union (EU) countries have suffered grave health and monetary problems triggered by indoor air pollution. Regulations of the European Union Common Standard (CEN/TS 16516) and European Union Building Materials are used in the evaluation of the measurement of emissions into indoor air, and the use of certified low-emission building material products has been recommended.[1,2,3,4] In 2014, the EU countries Germany and France incorporated the ISSN 0914-4935 © MYU K.K. https://myukk.org/. Verification of Low-Emission Building Materials law into the legal system for enactment. The research of the escape state of different benzenes and the assessment results of the health risks at different temperatures have been used to construct a passive sampling device for plastic materials such as synthetic leather, wallpaper, and ethylene flooring. Ethylene flooring containing 17% (w/w) DEHP was placed in six test FLECs at 22 °C, and it was observed that the specific emission rate (SER) of DEHP from vinyl flooring (VF) over one year was independent of RH.[7]

Objectives

Methods

Results

Conclusion