Establishing a protocol for water sample processing for the detection of Blastocystis sp.

Abstract

This study was aimed at establishing a protocol for water sample processing for the detection of Blastocystis sp. using distilled water spiked with Blastocystis sp. cysts.The study established a protocol involving eight technical aspects, namely, storage temperature, storage duration, minimum water sample volume, optimum relative centrifugal force, centrifugation duration, minimum number of cyst for inoculation in Jones' medium and turn-around-time for the detection of vacuolar forms of Blastocystis sp. Results showed a minimum of 1.0 L water sample should be collected and processed on the same day. Otherwise, it should be stored at 4 °C and processed within 3 days. Water sample should be centrifuged at 1400×g for 10 min. For the isolation of Blastocystis sp. cysts, parasite pellet could be layered on top of Ficoll-Paque™ PLUS, centrifuged at 1400×g for 20 min and washed twice using 0.9% saline with centrifugation at 1400×g for 10 min. A minimum of 1 × 105 cysts could then be inoculated in Jones’ medium supplement with 10% horse serum, incubated at 37 °C and examined for any presence of vacuolar forms of Blastocystis sp. after 3 days of inoculation. A protocol for water sample processing for the detection of Blastocystis sp. has successfully been established. The protocol was validated using 106 various water samples. This protocol will be very useful in determining the extent of Blastocystis sp. contamination in water sources in order to identify the seriousness of contamination.