Error Propagation Algorithm for Reduction of Errors Due to Total Load and Line Load in a Plasma Panel Display

Abstract

The displayed gray level of a plasma display panel (PDP) is often different from the intended target gray level because the displayed level is affected by the load of the panel. The effect of the load on the displayed gray level is decomposed into three factors: total load; line load magnitude; and line load distribution. Previous attempts to reduce this difference (i.e., error) have achieved only limited success because they have not taken three factors into consideration altogether. This paper proposes a new method that compensates for the error caused by all three factors. The proposed method first attempts to compensate for the error caused by line load magnitude and distribution. To this end, the error generated by one sub-field of a PDP is propagated to and compensated for by the remaining sub-fields. The amount of the error is reduced for every incidence of error propagation and, consequently, the final amount of error is reduced to a negligible level. To reduce the computational complexity for the evaluation of the amount of the error caused by the line load distribution, an iterative method is proposed to derive the effect of line load distribution on each cell from its adjacent cell. When sub-field coding is completed for a whole cells on a panel, total load of each sub-field is obtained and the error caused by total load is compensated for by controlling the number of sustain pulses for each sub-field. A significant error reduction is achieved, which shown by simulations and experiments with a 42-in. PDP set, including 91.2% reduction of the mean absolute error obtained through simulations and 69.7% reduction of luminance variation range caused by the load variation in experiments.