Erratum to: Toolpath strategies and management to optimize energy consumption on 3-axis CNC milling machine

Gandjar Kiswanto,Poly Poly,Yolanda Rudy Johan,E Kusrini,E.A Setiawan,A Yatim,F.H Juwono

doi:10.1051/e3sconf/20186702061

Abstract

Erratum to: Toolpath strategies and management to optimize energy consumption on 3-axis CNC milling machine

Highlights

Milling is one of the process of removing material which occurs because of the contact between the cutting tool that rotates on the spindle with the workpiece gripped on the machine table
It still operating on the same basic principles, modern CNC milling machines are significantly different from older milling machines
The fourth paragraph on the 1 Introduction section should be replaced as follows: Despite of its higher productivity and accuracy, the use phase of a CNC milling machine tool causes CO2 emissions varying from 60% to 90% [6]

Summary

Introduction

The third paragraph on the 1 Introduction section should be replaced as follows: Milling is one of the process of removing material which occurs because of the contact between the cutting tool that rotates on the spindle with the workpiece gripped on the machine table. The fourth paragraph on the 1 Introduction section should be replaced as follows: Despite of its higher productivity and accuracy, the use phase of a CNC milling machine tool causes CO2 emissions varying from 60% to 90% [6].

Objectives

Results

Conclusion